Night light Engraving

Showcase

Email this Article

Applicable Models

Download CDR File

Click here to download the video.
Click here to See it on YouTube.

A night light plugged into the outlet is one of the necessities in every family. It provides us sufficient lighting to prevent possible accidents happening in the dark. In the past, the bulb was often used in night light for lighting;however, nowadays in an energy-saving and eco-friendly era, companies replace the traditional lighting to LED to make night lights stylish and green, adding a variety of personal touch to home decoration.

This month, LaserPro Application Lab is using the functions of engraving and cutting to customize a special night light for you. The engraving function helps you engrave all kinds of patterns on acrylic; the cutting function can make the edges of acrylic more transparent, achieving better LED lighting performance.

Materials need to be prepared:

LED night light on Amazon
5mm Acrylic

Instructions:

Step 1. Put acrylic on the working table.

Step 2. Press Auto focus button for focusing.

Step 3. Press Start button for engraving/cutting.

Sample:

Reference Parameters

C180 30W
Pen	Speed	Power	DPI	PPI	Other
Engraving	50 %	15 %	500	400	Error Diffusion
Cutting	2 %	100 %	500	400	Error Diffusion

* Parameters are for suggestions only and should be moderately adjusted accordingly.

Tips:

Pay attention to the order of engraving/cutting; do engraving before cutting to avoid material waste.

Please make sure that the acrylic is even before engraving/cutting, focus error would cause poor finishing result.

Back	Email this Article