*

Laser Engraver

Christmas Gifts

Over the Christmas period, adults are busy decorating and choosing gifts while children anticipate receiving gifts they’ve longed for throughout the year. This month, LaserPro Application Lab has especially designed a cute coaster to help you enhance the Christmas atmosphere.

LaserPro Application Lab has used inexpensive nonwoven fabric for the top of the coaster and boosted the cutting effect by using its specially developed air nozzles for cutting the fabric. The coaster also has an MDF base, making it absorbent and firm. Next, let’s make some cute coasters with LaserPro!

Required Materials

  • Nonwoven Fabric
  • MDF
  • Adhesive Spray

Production Steps
Step 1. Use the adhesive spray to bond the nonwoven fabric and MDF together.

Laser fabric cutting with MDF

Step 2. Place to the working table and use auto focus.

Laser fabric cutting with MDF step by step

Step 3. Change Fine Nozzle

Laser fabric cutting with MDF change fine nozzle

*Do not use Auto Focus once the Ultra nozzle is in place. Doing so will cause the fine nozzle to hit the table and lead to equipment failure.

Step 4. Press Start to begin cutting.

Laser fabric cutting with MDF step by step

Step 5. Cull out unnecessary parts.

Laser fabric cutting with MDF step by step

Step 6. The coaster is now complete.

Laser fabric cutting for christmas gifts

Download file from:

 
Suggested Parameters:

C180 30W

 
Speed
Power
DPI
PPI
Other
Cutting
15%
90%
500
400
Air assist
Cutting (with MDF)
2 %
100 %
500
400
Air assist

Spirit 60W

 
Speed
Power
DPI
PPI
Other
Cutting
25%
90%
500
400
Air assist
Cutting (with MDF)
3 %
100 %
500
400
Air assist
 
Tips:
  • Before cutting, make sure the nonwoven fabric is completely flat to avoid material loss due to out-of-focus.
  • Use Auto Focus prior to installing the air nozzle to avoid collision between the air nozzle and the working table.